How To Make A Chainsaw Winch: The Complete Guide

How To Make A Chainsaw Winch
How To Make A Chainsaw Winch

You can find out how to make a chainsaw winch by reading the step-by-step instructions in this article. You will learn how to connect your motor and wire the electrical system.

Tree-cutting is not the only use for chainsaws. They can also be utilised to drive your winches. This post serves as a comprehensive how-to manual for creating the ideal chainsaw winch.

In the forests, chainsaws are a widely used instrument. But carrying logs by hand is difficult on the back. A straightforward winch can help you save your back while giving your chainsaw more power.

What is a chainsaw winch?

A chainsaw winch is a lightweight, portable tool used to draw or tighten a large object, like a tree trunk or log. It is made up of a handle-mounted spool of sturdy rope or chain that is coiled around the item to be hoisted. The chainsaw is then fastened to the other end of the rope or chain.

When the chainsaw is turned on, it pulls on the chain or rope, which causes the Winch to get more tightly wound around the object and start lifting it off the ground. With the chainsaw winch, you can lift things that weigh up to several hundred pounds.

Also Read : How A Hydraulic Winch Works And When You Might Use One

Things you need to Make Chainsaw Winch

What you will need to create your own chainsaw winch, assuming you don’t already have one, is as follows:

  • A chainsaw. Obviously.
  • Some heavy duty rope or chain.
  • a technique for mounting the winch on a tree or other structure. This might be a strap, extra rope, or any other suitable object.
  • something that can be used as a pulley. This might be another rope, a block and tackle, or a similar object.

You should have no trouble constructing a functional chainsaw winch with these components!

How to Make Chainsaw Winch in Easy Steps?

A chainsaw winch is a fantastic accessory if you’re trying to give your chainsaw even more versatility. Your chainsaw will become even more effective as a tool when you use a chainsaw winch to rapidly and simply lift logs or clear rubbish. This is how you can construct a chainsaw winch:

Step 1: Gathering the materials

Before you begin this project, you will need a few supplies. You’ll need a chainsaw first. Ensure sure the chain on the saw is sharp and that it is in good shape. A winch, several reliable anchor points, and a length of rope or cable are also required.

The next step is to gather some tools. You’ll require a method, such as straps or clamps, to fasten the saw to the winch. Moreover, you’ll require a method for attaching the rope or cable to the saw and the anchor points. Last but not least, you’ll need a stand or someone else to hold the saw while you work.

Step 2: Making the spool

This post is for you if you’re seeking for a straightforward method to create your own chainsaw winch. Your very own chainsaw winch may be set up and ready to assist you with all of your logging needs in just a few easy steps.

The spool needs to be made initially. A length of rope or chain long enough to extend from the ground to the top of the object you’re attempting to hoist is required. One end should be wrapped around the spool, and the other end should be threaded through the centre of the spool. Tie it off after pulling it tightly.

The spool needs to be fastened to a reliable object now. A huge rock or tree trunk will do beautifully. Make sure the stump, if you’re using one, isn’t too large around because you don’t want the spool to get trapped on it. Once the spool is firmly fastened, you can begin raising!

Step 3: Attaching the spool to the chain

You must pass the chain’s end through the spool in order to connect the spool to the chain. As you will need to pull on this end to tension the chain, make sure the chain’s end is facing in the right direction. You can start winding the chain once the end has been threaded through the spool. Make sure to wind it tightly so that it won’t unravel quickly.

Step 4: Adding the handle and cutting teeth

It’s now time to attach the handle and cutting teeth to the chainsaw winch, assuming you have all the other components already. Although it’s a rather simple process, there are a few things you should bear in mind.

Make sure the handle is first firmly fastened to the saw. While using it, you don’t want it to become loose. Second, take great care not to harm the chain when cutting the teeth. If you do, it might really hurt you.

Let’s get started now that those cautions have been issued. Take the handle first, then screw it onto the saw’s top. To prevent it from coming loose while you’re working, make sure it’s tight.

The teeth on the chain should then be sharpened using a file or grinder. Be very careful not to in any way harm the chain. Your chainsaw winch will be ready to use once you have finished honing the teeth.

Step 5: Loading up your chainsaw and attaching it to your winch

Make sure your chainsaw is properly greased and fuelled before anything else. After completing that, you must attach your chainsaw to the winch. You must first attach the chainsaw’s blade guard before you can do this. After that, detach the chainsaw’s bar and chain.

At this point, you can insert the winch rope’s end through the chainsaw’s eyelet. You then need to reattach the chainsaw’s bar and chain. Last but not least, tighten the winch rope clamp.

Also Read : Synthetic Winch Rope: All You Need To Know

Why do I need a chainsaw winch?

A chainsaw winch is a tool that facilitates the removal of heavy or challenging-to-move trees or logs. A motorised spool that coils and unwinds a chain around the target object makes up the system. Without having to put your back into it, you may swiftly and effortlessly clear obstructions from your path using the chainsaw winch.

Chainsaw winches come in a wide variety of designs, but they all have the same function: to make your life simpler. An indispensable item for you is a chainsaw winch if you frequently work with large trees or logs. You’ll save time and effort, and the job will be lot safer as a result.

Who can use the chainsaw winch?

Everyone who needs to transport large objects can make use of the chainsaw winch because it is a multipurpose instrument. Logs, rocks, tree stumps, and other substantial objects can all be moved using it. The chainsaw winch is incredibly safe and simple to use.

Also Read : The Different Ways To Mount A Winch And How They Work


This article should have covered all the details you need to know about how to construct a chainsaw winch if you’re in the market for one. We’ve discussed the many components and supplies you’ll need, as well as how to assemble everything. You should be able to construct your very own chainsaw winch with a little time and work, and it will serve you well for many years to come.

Leave a Comment

Social media & sharing icons powered by UltimatelySocial
Follow by Email